Gutter Cost Calculator – Installation, Replacement & Seamless Gutters
Free gutter cost calculator — estimate installation, replacement, or seamless gutter costs per linear foot. Covers aluminium, vinyl, copper, and eavestrough installation costs
Gutter Cost Calculator: Installation, Replacement & Seamless Gutter Estimates
Gutter installation costs $4–$25 per linear foot — a range driven by material, home height, region, and tear-out. This free gutter cost calculator covers new installation, replacement, and repair. Canadian eavestrough installation cost is shown in CAD. Select your project type below and get your estimate instantly.
Estimated Total Cost
Base cost = linear_ft × material_avg_cost_per_ft
Labour is approximately 60% of base cost; materials approximately 40%. Storey surcharges apply to the labour portion only, not materials.
Labour = base × 0.60 | Two-storey: labour × 1.20 | Three-storey: labour × 1.425
Adjusted total = (base × 0.40) + adjusted_labour → then apply regional multiplier
Regional multiplier applied to adjusted total after storey surcharge:
National avg: ×1.0 | South/Gulf: ×1.12 | Northeast: ×1.18 | West Coast: ×1.15 | Midwest: ×0.95
Canada and UK use separate rate tables in local currency.
Downspouts: qty × $10 avg (range $8–$12 each installed)
Basic gutter guards: linear_ft × $2.50 avg | Micro-mesh: linear_ft × $8 avg
Fascia board repair: fascia_ft × $11.50 avg | Old gutter removal: linear_ft × $1.50 avg
Aluminium eavestrough: C$8–$14/ft | Seamless aluminium: C$12–$18/ft | Steel: C$10–$16/ft
All prices in Canadian dollars. Typical bungalow (150 ft): C$1,200–$3,000 aluminium; C$1,800–$3,500 seamless.
Toronto, Vancouver, Calgary: add 10–20% to Canadian averages.
uPVC guttering: £20–£35/metre | Aluminium guttering: £30–£60/metre | Cast iron: £50–£90/metre
All prices in GBP per metre installed. UK mode converts linear feet to metres automatically.
| Material | $/ft range | 100 ft est. | 150 ft est. | Lifespan | Best for |
|---|---|---|---|---|---|
| Vinyl | $4–$8 | $400–$800 | $600–$1,200 | 10–20 yrs | Budget / mild climates |
| Aluminium Sectional | $6–$12 | $600–$1,200 | $900–$1,800 | 20–30 yrs | Standard residential |
| Seamless Aluminium ★ | $8–$15 | $800–$1,500 | $1,200–$2,250 | 20–30 yrs | Best value — most popular |
| Galvanised Steel | $9–$14 | $900–$1,400 | $1,350–$2,100 | 20–30 yrs | Heavy snow/ice regions |
| Copper | $15–$25 | $1,500–$2,500 | $2,250–$3,750 | 50+ yrs | Premium homes |
| Zinc | $18–$28 | $1,800–$2,800 | $2,700–$4,200 | 50+ yrs | Architect / luxury |
| Storeys | Labour premium | Effect on 150 ft project | Note |
|---|---|---|---|
| Single storey | None (baseline) | $0 additional | Standard pricing |
| Two storeys | +15–25% on labour | ~$150–$350 extra | Extended ladder time |
| Three+ storeys | +35–50% on labour | ~$400–$700+ extra | Scaffolding often required |
| Region | Multiplier | 150 ft estimate | Reason |
|---|---|---|---|
| National average | ×1.0 | $1,200–$2,250 | Baseline |
| South / Gulf Coast (LA,FL,TX,MS) | ×1.12 | $1,344–$2,520 | Storm-season demand |
| Northeast (NY,NJ,MA,CT) | ×1.18 | $1,416–$2,655 | High labour market |
| West Coast (CA,OR,WA) | ×1.15 | $1,380–$2,588 | High labour costs |
| Midwest (OH,IN,MI,MN) | ×0.95 | $1,140–$2,138 | Competitive market |
| Material | C$/ft | C$/metre | Average home total (CAD) |
|---|---|---|---|
| Aluminium eavestrough | C$8–$14 | C$26–$46 | C$1,200–$2,300 |
| Seamless aluminium ★ | C$12–$18 | C$39–$59 | C$1,800–$3,000 |
| Steel eavestrough | C$10–$16 | C$33–$52 | C$1,500–$2,600 |
| Repair type | Typical cost | When recommended |
|---|---|---|
| Gutter cleaning (whole house) | $150–$400 | Annual maintenance |
| Sealing / re-caulking joints | $100–$250 | Leaking seams on good gutters |
| Rehanging sagging section | $50–$100/section | Loose hangers / fascia pull-out |
| Patching small holes | $100–$200 | Rust holes under 1″ diameter |
| Partial section replacement (10 ft) | $80–$150 | Localised damage |
| Downspout repair / replacement | $50–$100 each | Dented or separated |
| Full gutter resealing | $200–$400 | Old sealant failing throughout |
How to Use the Gutter Cost Calculator
This free gutter cost calculator covers three project types: new installation, full replacement (including removal of old gutters), and repair or partial work. For Canadian homeowners, eavestrough installation cost is shown in CAD — select the Canada option in the Region dropdown. The calculator always shows a seamless vs sectional aluminium comparison in the results, regardless of which material you select — the most useful reference when getting gutter quotes. Regional premiums (Gulf Coast, Northeast, West Coast) are automatically applied when you select your region.
Step 1 — Select Your Project Type
New Installation: a brand-new gutter system on a home with no existing gutters or a new build. Replacement: removing old gutters plus installing new ones — the most common project for existing homes over 20 years old. Repair / Partial: cleaning, resealing, rehanging, patching, or replacing a section of gutters without full system replacement.
Step 2 — Enter Total Linear Footage
Linear footage is the total combined length of all gutter runs — every roof edge that drains into a gutter. A quick estimate: measure the total perimeter of the building’s roofline that has overhanging eaves. Average single-storey home: 100–150 linear feet. Two-storey home: 150–200 feet. Canadian bungalow eavestrough: 30–50 metres (100–165 ft).
Step 3 — Choose Gutter Material
Vinyl ($4–$8/ft) is cheapest but brittle in cold climates — lifespan 10–20 years. Aluminium sectional ($6–$12/ft) is rust-resistant and the most common DIY material. Seamless aluminium ($8–$15/ft) is contractor-fabricated on-site with no mid-run joints — the most popular installed option. Galvanised steel ($9–$14/ft) handles heavy snow load and ice well. Copper ($15–$25/ft) is premium, lasts 50+ years, and develops a distinctive patina over time.
Step 4 — Set Storeys and Region
Two-storey homes cost significantly more in labour because contractors need extended ladders and more time per linear foot — expect 15–25% more on the labour portion. Select the region closest to your location. Gulf Coast and Northeast markets are notably more expensive due to storm-season demand and higher local labour costs.
Step 5 — Read the Cost Breakdown
Results show four blocks: total cost range (low–high), cost per linear foot, materials vs labour breakdown, and the always-visible seamless vs sectional comparison. The comparison shows exactly what the upgrade to seamless costs for your specific footage — the most common decision point when reviewing gutter contractor quotes.
Gutter Installation Cost Per Linear Foot — By Material
Gutter installation cost is almost always quoted per linear foot — the total length of gutter being installed. National average costs per linear foot installed (materials + labour) range from $4 to $25 depending on material, with seamless aluminium being the most popular professional choice at $8–$15/ft.
| Material | $/ft (installed) | 100 ft est. | 150 ft est. | Durability |
|---|---|---|---|---|
| Vinyl | $4–$8 | $400–$800 | $600–$1,200 | 10–20 years |
| Aluminium sectional | $6–$12 | $600–$1,200 | $900–$1,800 | 20–30 years |
| Seamless aluminium ★ | $8–$15 | $800–$1,500 | $1,200–$2,250 | 20–30 years |
| Galvanised steel | $9–$14 | $900–$1,400 | $1,350–$2,100 | 20–30 years |
| Copper | $15–$25 | $1,500–$2,500 | $2,250–$3,750 | 50+ years |
These prices include both materials and professional installation labour. DIY installation reduces cost to materials only — typically $1–$4/ft for vinyl or sectional aluminium — though seamless gutters require specialist on-site fabrication equipment and cannot be DIY-installed. For replacement projects, add $1–$2/ft for removal and disposal of old gutters.
Seamless Gutter Cost vs Sectional — Which Is Worth It?
Seamless aluminium gutters cost approximately $2–$5 per linear foot more than sectional aluminium gutters. On a 150-foot system, that is an additional $300–$750 — and most contractors and experienced homeowners consider it well worthwhile for any run over 30 feet.
| Factor | Sectional Aluminium | Seamless Aluminium |
|---|---|---|
| Cost per ft | $6–$12 | $8–$15 |
| Joints | Every 10–12 ft | Corners & downspouts only |
| DIY possible | Yes | No (fabrication machine) |
| Leak risk | Higher | Significantly lower |
| Appearance | Visible seams | Clean, continuous |
| Lifespan | 20–30 years | 20–30 years (same material) |
When is sectional acceptable? Short runs under 20–30 feet where a single joint is easy to seal and maintain. Budget-constrained projects with planned regular maintenance. DIY installations where seamless equipment is unavailable. For all other situations — particularly runs over 40 feet — seamless is the professional standard.
Eavestrough Installation Cost — Canadian Pricing Guide
Eavestrough installation in Canada typically costs C$8–$18 per linear foot installed, depending on material and region. A typical bungalow with 30–50 metres (100–165 feet) of eavestrough runs C$1,200–$3,000 for aluminium installation or C$1,800–$3,500 for seamless aluminium eavestrough installed.
| Material | C$/linear ft | C$/metre | Avg home total (CAD) |
|---|---|---|---|
| Aluminium eavestrough | C$8–$14 | C$26–$46/m | C$1,200–$2,300 |
| Seamless aluminium eavestrough ★ | C$12–$18 | C$39–$59/m | C$1,800–$3,000 |
| Steel eavestrough | C$10–$16 | C$33–$52/m | C$1,500–$2,600 |
Prices are in Canadian dollars. Average home assumes 150 ft / 46 metres total eavestrough. Toronto, Vancouver, and Calgary typically run 10–20% above the national Canadian average. Eavestrough replacement — removing old eavestroughs before installing new — adds approximately C$2–$3/ft. Use the Canada option in the Region selector above for CAD estimates.
Gutter Repair Cost — When to Repair vs Replace
Gutter repair is significantly less expensive than full replacement — but only worthwhile if the gutters are structurally sound. If gutters are more than 15–20 years old, sagging in multiple places, or showing widespread rust or seam failure, replacement is typically more cost-effective than repeated repairs.
| Repair Type | Typical Cost | When Recommended |
|---|---|---|
| Gutter cleaning (whole house) | $150–$400 | Annual maintenance — prevents overflow damage |
| Sealing / re-caulking joints | $100–$250 | Leaking seams on otherwise good gutters |
| Rehanging sagging section | $50–$100/section | Loose hangers or fascia pull-out |
| Patching small holes | $100–$200 | Rust holes under 1″ diameter |
| Partial section replacement (10 ft) | $80–$150 | Localised damage, rest intact |
| Full gutter resealing | $200–$400 | Old sealant failing throughout |
Use the Repair tab in the calculator above to estimate costs for specific repair types. If total repair cost exceeds 40–50% of full replacement cost, replacement is usually the smarter long-term investment.
Gutter Installation Costs by Region — US Cost Guide
Gutter installation costs vary significantly by region — driven by local labour markets, storm-season demand, and material availability. The national average is the baseline; Gulf Coast and Northeast markets run 10–18% higher.
| Region | Multiplier | 150 ft Seamless Estimate | Why |
|---|---|---|---|
| National average | ×1.0 | $1,200–$2,250 | Baseline |
| South / Gulf Coast (LA, FL, TX, MS) | ×1.12 | $1,344–$2,520 | Storm demand; hurricane prep surges |
| Northeast (NY, NJ, MA, CT) | ×1.18 | $1,416–$2,655 | High labour market costs |
| West Coast (CA, OR, WA) | ×1.15 | $1,380–$2,588 | High labour costs |
| Midwest (OH, IN, MI, MN) | ×0.95 | $1,140–$2,138 | Lower labour, competitive market |
Louisiana specifically runs 10–15% above the national average due to high storm-season demand — contractors are frequently booked well in advance before hurricane season. Scheduling gutter installation in January–March typically yields better pricing and shorter wait times in Gulf Coast states compared to May–August.
Frequently Asked Questions — Gutter Cost
More Free Construction Calculators
All calculators are free and require no account or signup.
The Gutter Cost Calculator on this page is the most complete free estimator available — covering new installation, replacement, and repair across all major materials, with regional cost adjustment, storey surcharge, full accessory costs, and Canadian eavestrough pricing in CAD. The seamless vs sectional comparison is always shown in results — the feature homeowners find most useful when reviewing contractor quotes. Use the free Gutter Cost Calculator above — select your project type and get your estimate in seconds.